SEQ v4+ Enhanced LH Essential Kit
Manufacturer: midiphy
Product ID: K-SFE-01L
MIDIbox SEQ v4+ enhanced edition kit. LH case incl. rack kit (optional, needs 3U and 3mm of rack height), PCBs, UI parts, light|shields and L4 caps. Needs further parts to be completed.
Weight: 3300 grams
*Note that the 2023 SEQ v4+ kits ship without the LineRX PCB, which is not required for the SEQ v4+ build - for modular/eurorack integration we'd recommend our Eurorack Modules kit, which includes a line receiver*
in stock
799.99 €
incl. VAT, excl. shipping
Products contained in this kit
Bill of Materials / Placement Guide
Label
Package
Name
Side
Part Link
Notes
Label
Package
Name
Side
Part Link
Notes
Label
Package
Name
Side
Part Link
Notes
Label
Package
Name
Side
Part Link
Notes
Label
Package
Name
Side
Part Link
Notes
Label
Package
Name
Side
Part Link
Notes
Label
Package
Name
Side
Part Link
Notes
Label
Package
Name
Side
Part Link
Notes
Label
Package
Name
Side
Part Link
Notes
Label
Package
Name
Side
Part Link
Notes
Label
Package
Name
Side
Part Link
Notes
Required Mouser parts
Can be directly transferred into your
mouser cart by copying & pasting the text below into the mouser part list import tool (you
may need to log in at mouser before the tool is available):
https://www.mouser.com/tools/part-list-import.aspx
https://www.mouser.com/tools/part-list-import.aspx
512-1N4148TR|89 798-MDF710S254DSA55|6 80-C1206C104M5R|20 771-BAT54235|16 595-SN74HC165D|7 595-SN74HC595DR|10 517-929700-01-36-RK|2 517-30310-6002|15 652-CR1206JW-103ELF|19 660-MF1/4DCT52R1001F|48 660-MF1/4DCT52R47R0F|32 652-4610X-1LF-10K|6 652-CR1206-JW-102ELF|19 642-3FTH9|34 642-1S11-19.0|34 863-BC818-40LT1G|16 771-BC807-25-T/R|16 757-TBD62381AFWGEHZ|1 517-N2516-6002RB|4 517-30308-6002HB|1 604-WP154A4SUREQBFZW|1 660-MF1/4DCT52R4701F|5 652-4816P-1LF-10K|2 538-22-23-2031|2 517-929836-01-36-RK|1 4816P-T02-103LF|1 534-7695|6 771-74HCT125D-Q100J|2 571-1-215570-0|2 649-93992-436HLF|1 650-NANOSMDC075F-2|1 652-CR1206JW-220ELF|2 652-CR1206JW-331ELF|1 660-MF1/4DCT52R1002F|2 660-MF1/4DCT52R2201F|2 652-CR1206JW-222ELF|2 71-CRCW1206560RJNEB|1 660-MF1/4DCT52R2203F|1 660-MF1/4LCT52R331J|1 490-SJ1-3535NG|1 611-1101M2S4AV2BE2|1 512-BC33725TAR|1 771-PRTR5V0U2X-T/R|1 538-67068-8000|1 538-89485-8000|1 594-K104K15X7RF5TL2|7 517-D2516-6V0C-AR-WE|1 517-SD-RSMT-2-MQ|1 642-MJTP1117|1 806-KCDX-5S-S2|10 490-SDF-80J|2 512-6N138M|4 517-4808-3004-CP|4 660-MF1/4DCT52R2200F|20 K330J15C0GF5TL2|8 517-4818-3000-CP|4 ECS-200-18-4X-CKM|4 636-182-025-213R561|1 595-MC3487NE4|2 517-4816-3000-CP|2 660-MF1/4DCT52R1000F|2 517-89110-0101|14 517-89116-0101|7 517-3365/10FT|6 517-3365/26FT|10 517-929838-04-36-RK|1 517-89124-0101|1 710-61200823021|1
Optional (DNF) Mouser parts
These parts are not required for a normal build - in general: don't buy them! They would go to the greyed-out locations specified as DNF ("do not fit") in the BOM above. If you want them anyways, e.g. for a special usecase, you can also copy & paste them into your mouser cart:
534-7695|2 517-30310-6002|9 652-3306F-1-103|2 660-MF1/4DCT52R1002F|1 660-MF1/4DCT52R1001F|1 512-BC33725TAR|1
The BOM checker 'bot says:
All parts referenced from the CAD master files have been validated. The BOM should be safe to order!*
* Disclaimer: although we have taken the best care possible, we cannot guarantee 100%
accuracy and we cannot be held liable for erroneous orders when using
this tool, including (but not limited to) incorrect quantities and/or
types of components ordered through midiphy or other suppliers.
Recommended products
These additional products may be of interest,
if you are browsing this product. If you are buying a midiphy essential kit, everything necessary
is included. If you are buying basic products, please check if any of these items may be helpful for your build.
19" Rack Installation Note
Yes, we utilized every last millimeter of the SEQ v4+ case! :)
Your SEQ v4+ will fit in a 19" rack and will occupy 3U - the SEQ v4+ front panel size is at exactly the allowed size of 133,3 mm for a 3U rack unit. But: there are a few case screws in the back of the SEQ v4+, that, depending on the neighboring synths/rack units might push the required height to 136 mm.
As many synths often don't use their full allowed height at that depth, this is very often unproblematic.
Note, that installing the SEQ v4+ is easier, when you install it in a rotating motion, install the bottom edge first, then "roll in" the top.
Also, normally enough space can be made available, as there is almost always a bit of "wiggle room" present, as many synths/rack units will not use their full allowed height over their full depth. Installation will also be easier, if you do not install the SEQ v4+ as the last unit in your 19" rack, but first leave e.g. the top space unoccupied, then install the SEQ v4+, and then install the rack unit on top.
If you still encounter vertical fit problems, you could also remove the problematic screws at the backside of the SEQ v4+, reducing its height requirement to the exactly allowed 133,3mm. These screws may not be needed for stability, if your SEQ v4+ is firmly installed in a 19" rack.
In short: your sequencer will fit in 3U, but we just wanted to tell you that it can be a close thing! :)
Your SEQ v4+ will fit in a 19" rack and will occupy 3U - the SEQ v4+ front panel size is at exactly the allowed size of 133,3 mm for a 3U rack unit. But: there are a few case screws in the back of the SEQ v4+, that, depending on the neighboring synths/rack units might push the required height to 136 mm.
As many synths often don't use their full allowed height at that depth, this is very often unproblematic.
Note, that installing the SEQ v4+ is easier, when you install it in a rotating motion, install the bottom edge first, then "roll in" the top.
Also, normally enough space can be made available, as there is almost always a bit of "wiggle room" present, as many synths/rack units will not use their full allowed height over their full depth. Installation will also be easier, if you do not install the SEQ v4+ as the last unit in your 19" rack, but first leave e.g. the top space unoccupied, then install the SEQ v4+, and then install the rack unit on top.
If you still encounter vertical fit problems, you could also remove the problematic screws at the backside of the SEQ v4+, reducing its height requirement to the exactly allowed 133,3mm. These screws may not be needed for stability, if your SEQ v4+ is firmly installed in a 19" rack.
In short: your sequencer will fit in 3U, but we just wanted to tell you that it can be a close thing! :)
Video Tutorials
Downloads (for the tests described in the video tutorial)
MIDIbox NG test configuration
SEQ_L.ngc (28.50K)MIDIbox NG test script
fluxtest.ngr (8.83K)