D1 Frontpanel (Eurorack)

C-EUR-02

D1 Digital Expander "gates" module frontpanel by Hallik Engineering. Natural aluminium with black silkscreen labels. 4HP.

D2 Frontpanel (Eurorack)

C-EUR-03

D2 Digital Expander "clocks" module frontpanel by Hallik Engineering. Natural aluminium with black silkscreen labels. 4HP.

D3 Frontpanel (Eurorack)

C-EUR-04

D3 Digital Expander "triggers" module frontpanel by Hallik Engineering. Natural aluminium with black silkscreen labels. 4HP.

A1 Frontpanel (Eurorack)

C-EUR-05

The A1 - Analog Expander module frontpanel by Hallik Engineering. Natural aluminium, with black silkscreen labels. 6HP.

SEQ v4+ 40x2 OLED protector

C-SDP-01

Precision milled SEQ v4+ display protector (for 40x2 OLEDs) - a replacement, if your original gets scratched. This is a single unit, a SEQ v4+ requires two protectors. Protected by a layer of tape.

SEQ v4+ activity matrix protector

C-SDP-02

Precision milled SEQ v4+ activity matrix protector (for dual 8x8 LED matrices) - a replacement, if your original activity matrix protector gets scratched. Protected by a layer of tape.

SEQ v4+ LH JA Case (Blue/White)

C-SEQ-01L

"Left hand" SEQ v4+ case designed by Hallik Engineering. Fully painted with silkscreen labels. Includes milled display windows and blanking plate. Optionally rack mountable (needs rack kit).

SEQ v4+ RH JA Case (Blue/White)

C-SEQ-01R

"Right hand" SEQ v4+ case designed by Hallik Engineering. Fully painted with silkscreen labels. Includes milled display windows and blanking plate. Optionally rack mountable (needs rack kit).

SEQ v4+ Rack Mount Kit

C-SEQ-02

SEQ v4+ rack mount kit. The 19 inch rack ears are milled for a perfect fit and are painted in the same color scheme as the SEQ v4+. Needs 136mm (3U and three millimeters) of rack height.

SEQ v4+ Case fastening hardware

W-SEQ-01

SEQ v4+ hardware set: M3 screws and nuts, M3 5mm, 10mm and 20mm hex standoffs required for case installation of all PCBs in the midiphy SEQ v4+ cases.

SEQ v4+ LH JA Gate/FSW Cable

W-SEQ-03L

SEQ v4+ cable for left-handed cases. Connects footswitch/external gate input with the JA PCB, so that the sequencer can handle these external signals.

SEQ v4+ RH JA Gate/FSW Cable

W-SEQ-03R

SEQ v4+ cable for right-handed cases. Connects footswitch/external gate input with the JA PCB, so that the sequencer can handle these external signals.

Euroceiver Frontpanel (Eurorack)

C-EUR-01

Euroceiver module frontpanel by Hallik Engineering. Natural aluminium with black silkscreen labels. 4HP.

Euro fastening hardware A1, D1-D3

W-EUR-01

For assembling our Eurorack PCBs. Contents sufficient for all modules A1, D1, D2, D3. Kit contains 10 pcs M2 standoffs and 20 pcs M2 screws.