SEQ v4+ 40x2 OLED protector

C-SDP-01

Precision milled SEQ v4+ display protector (for 40x2 OLEDs) - a replacement, if your original gets scratched. This is a single unit, a SEQ v4+ requires two protectors. Protected by a layer of tape.

SEQ v4+ activity matrix protector

C-SDP-02

Precision milled SEQ v4+ activity matrix protector (for dual 8x8 LED matrices) - a replacement, if your original activity matrix protector gets scratched. Protected by a layer of tape.

AL4002A OLED, 40x2 Characters, White

D-OLW-01

40x2 character OLED, white pixels, 3.3V supply, HD44780 compatible controller, parallel/SPI/I2C interfaces

5pcs ALPS STEC12E08 encoders

E-STC-01

Our standard encoders. They have proven to be highly reliable after years of use. They include a pushbutton, e.g. for encoder input acceleration.

2pcs low-profile 2x25 pin female headers

H-25F-01

Female headers to attach the waveshare Core407V MCU board to the wCore. This low-profile variant is required to allow the wCore PCB to fit into the SEQ v4+ case.

PJ398SM jack (x10)

J-301-01

10 pcs PJ398SM vertical mount 3.5mm jacks for Eurorack modular. Includes hex nuts.

10pcs LED Green Clear 2x3x4mm

L-G-01

Green, 2x3x4mm, ~2mA current using a 1k current limiting resistor @5V

2pcs LED Mini Matrix, 8x8, White

L-M-01

Common cathode, 20mm x 20mm. Used on the new JA PCB of the MIDIbox SEQ v4+, e.g. for track position indication. This set contains two pieces.

10pcs LED Red Clear 2x3x4mm

L-R-01

Red, 2x3x4mm, ~7mA current using a 470R current limiting resistor @5V

5pcs RGB LED, common cathode

L-RGB-01

Superflux RGB LED with a flat top. Suitable for midiphy projects involving illuminated Matias switches.

10pcs LED White Clear 2x3x4mm

L-W-01

White, 2x3x4mm, ~2mA current using a 1k current limiting resistor @5V

10pcs LED Color Mix Clear 2x3x4mm

L-X-01

Contains 2pcs of each red, green, blue, orange, white. Ideal for RES-SD/LoopA Core status indicator LEDs. Check color with a coin cell or DMM in diode test mode.

MCU Core407V, 1MB flash, bootloader

M-407-02

Waveshare Core407v with bootloader. Directly upload firmware using MIOS Studio via a USB cable; no ST-Link required! 1MB flash memory.

4pcs PIC16F88, MIDIbox I2C firmware

M-I2C-01

These PICs are already flashed with the MIDIbox I2C firmware. Used in the MIDI IIC boards (P-COR-04).

5pcs Light|Shield Standard

S-LIS-01

Light isolation for backlit Matias switches: ideal for fitting before keycaps are installed (pictured switch is not included)

5pcs Matias Quiet Click Tactile Switch

S-MQC-01

The quiet, but still very tactile version of the Matias "click" switch. Highly recommended!

5pcs K85 cap, black (for K88 knob)

T-K85-B

Black knob caps for the K88 knobs.

5pcs K88 knobs, black, d-shaft

T-K88-B

Our recommended 6mm D-shaft encoder knobs for the Seq V4+ and the LoopA. Don't forget to order the K85 knob caps!

Datawheel Knob DK30-105

T-KDW-01

Datawheel knob used in the MIDIbox Seq v4+. 6mm D-shaft mounting, 30mm outer diameter. Perfect for our standard encoders (E-STC-01).